English
69
Manual Station Finding
1. Use the SOURCE SELECT (Fig. 3/31) button to select the TUNER mode.
2. Press the „
/
“ buttons (Fig. 3/5, 7) to search for a station.
Press the corresponding button repeatedly until you have found the
desired radio station.
3. In order to store the radio station press the MEMORY/AUDIO (Fig.
3/10) button; “- -” appears in the display.
4. Then enter the desired storage location by means of the Numerical
buttons (Fig. 3/20).
In order to select the stored radio stations press the „
I / I
“ (Fig.
3/23, 25) button or enter the storage location with the Numerical but-
tons (Fig. 3/20).
Troubleshooting
Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault Possible
cause
Solution
The power supply light
does not light
No power supply
WARNING: Before troubleshooting, switch the
player off .
Put the mains plug in correctly, if necessary, check the
socket is working with another appliance.
no power supply/ mains switch
switched off
Switch the player on by the mains switch (Fig. 1/15).
No image displayed on
screen
Video cable not correctly
connected
WARNING: Before troubleshooting, switch the
player off .
Check the correct fi t of the Video cable „Connecting the
Video cable“. Make sure that the jacks are tightly in the
sockets.
no DVD/CD inserted
Insert a CD/DVD.
DVD/CD not compatible
Use only compatible media (see „Technical data“).
DVD/CD incorrectly placed in
CD/DVD-tray
Turn the CD/DVD around.
CD/DVD is dirty
Clean the CD/DVD.
CD/DVD is damaged
Use a diff erent CD/DVD.
Incorrect settings
Check the settings of your DVD-Player.
The child lock system is acti-
vated
Deactivate the child lock „Parental“.
The wrong TV mode has been
selected (no P-SCAN-capable
playback device).
Press the V-Mode button (Fig. 3/29) to change the TV
mode (interlace).
No response when pres-
sing button
Power supply problem or static
charging of appliance
Switch off the main switch and pull out the mains plug.
Insert the mains plug into the socket and switch the
player on again.
No sound
Audio cable not connected
WARNING: Before troubleshooting, switch the
player off .
Video plug for transmission of the Video signal, you must
use and Audio cable in addition to the Video cable
➯
„Connecting the Audio cable“.
Amplifi er switched off
If you use an amplifi er for Audio output: check whether
the amplifi er is switched on.
Incorrect settings
Check the settings of your DVD-Player.
05-DVD 4615 HC_GB.indd 69
05-DVD 4615 HC_GB.indd 69
21.05.2008 8:08:32 Uhr
21.05.2008 8:08:32 Uhr