AEG ESL8825RA, User Manual

Options

Values

Description

XtraDry

ON

OFF (default value)

Activate this option if you

want to boost the drying

performance. Refer to spe‐

cific information provided in

this chapter.

Settings

Enter appliance settings

7.2 How to set an option

The option list will show only the options

applicable to the currently selected

programme. Non applicable options are

not visible.
Some options are not compatible with

each other. When you set 2 options that

are not compatible with each other, the

appliance will automatically deactivate

one of the options.
When the programme is completed or is

cancelled the options are set to the

default values.
1. Press the Option key.

2. Select an option.

The display shows the option value

indicated in parenthesis.

3. Press the OK key to change the

value from OFF to ON or vice versa.

If the selected option is Delay start, when

you press the OK key the display shows

the number of hours available for the

delay start. Select the number of hours

and press again the OK key to confirm.

4. To go back to the programme list,

press repeatedly the Option key until

the display shows the selected

programme.

7.3 XtraDry

Activate this option when you want to

boost the drying performance. With use

of this option, the duration of some

programmes, water consumption and the

last rinse temperature can be affected.
The XtraDry option is a permanent option

for all programmes other than ECO and

need not to be selected at every cycle.

Every time ECO is activated, XtraDry

option is off and needs to be chosen

manually. In other programmes, the

setting of XtraDry is permanent and it is

automatically used in next cycles. This

configuration can be changed at any

time.
Activating XtraDry option deactivates

TimeManager.

7.4 TimeManager

This option increases the pressure and

the temperature of the water.
The washing and drying phases are

shorter. The total programme duration

decreases by approximately 50%.
The washing results are the same as

with the normal programme duration but

the drying results can be less

satisfactory.
The TimeManager option is not

applicable to all programmes.
1. Scroll through the programme list

and select a programme.

2. Press the OK key to confirm.

If the TimeManager option is applicable

to the selected programme, the display

shows the 2 conditions Fast and Normal

and the programme duration for each

condition:

• Fast: TimeManager activated.

Press the OK key to confirm.

• Normal: TimeManager

deactivated. Press the OK key to

confirm.

www.electrolux.com

12