Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Elec-
tronic
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
< 4
< 7
< 0.7
< 5
1
2)
1
2)
1)
Factory position.
2)
Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1.
Press the on/off button to activate
the appliance.
2.
Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3.
Press and hold the programme but-
ton until the programme indicator (
A
)
starts to flash and the programme in-
dicator (
B
) comes on.
4.
Wait until the programme indicator
(
B
) goes off and the end indicator
starts to flash (the programme indica-
tor (
A
) continues to flash).
5.
Press the programme button.
• The end indicator flashes intermit-
tently. The number of flashes
shows the level of the water soften-
er, e.g. 5 f pause + 5 flash-
es = level 5.
6.
To adjust the level of the water soft-
ener, press the programme button.
Each time you press the programme
button you go to the next level.
7.
Deactivate the appliance to confirm
the setting.
ENGLISH
25
