7
Prior to using for the first time
3
If you wish to use 3 in 1 detergent:
– First read the section “Using 3in1 detergents”.
– Do not fill up with special salt or rinse aid.
If you do not use 3in1 detergent, before using for the first time
1.
Set the water softener
2.
Fill up with special salt for water softeners
3.
Fill up with rinse aid
Setting the water softener
The water softener must be set manually and electronically:
3
To avoid scale deposits on the dishes and in the dishwasher, the dishes
must be washed with soft water, i.e. water with a low lime content. The
water softener must be set according to the table to the water hard-
ness in the area where you live. Your local water company will be able
to give you information about the water hardness in your area.
The dishwasher must be switched
off.
Setting manually:
1.
Open the dishwasher door.
2.
Remove the lower basket from the
dishwasher.
3.
Turn water hardness dial on the left
wall of the dishwasher interior to O
or 1 (see table).
Setting electronically:
1.
Press the ON/OFF button.
3
If the only LED indicator illuminated is one that belongs to a pro-
gramme button, this means that this dishwashing cycle has been acti-
vated. The dishwashing cycle must be deselected:
Press function buttons
2
and
3
simultaneously for approx. 2 seconds.
The LED indicators of all the programme buttons that can be selected
light up.
2.
Press function buttons
2
and
3
simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
