background image

Problem

Possible cause

Possible solution

 

The quantity of detergent
was too much.

Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.

Dry water drop
stains on glasses
and dishes.

The released quantity of
rinse aid was not sufficient .

Increase the released quanti-
ty of rinse aid.

 

The quality of the detergent
can be the cause.

Try a different brand of de-
tergent.

The dishes are wet.

• The programme had no

drying phase.

• The programme had a

low temperature drying
phase.

For better drying results,
keep the door ajar for some
minutes.

The dishes are wet
and matt.

The rinse aid dispenser is
empty.

Make sure that there is rinse
aid in the rinse aid dispenser.

 

The quality of the rinse aid
can be the cause.

Try a different brand of rinse
aid.

 

The quality of the combi
detergent tablets can be
the cause.

• Try a different brand of

combi detergent tablets.

• Activate the rinse aid dis-

penser and use the rinse
aid together with the com-
bi detergent tablets.

Activating the rinse aid
dispenser with the multitab
function activated

1.

Press the on/off button to activate
the appliance.

2.

Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.

3.

Press and hold buttons (

4

) and (

5

) at

the same time until the indicators of
buttons (

3

), (

4

) and (

5

) flash.

4.

Press button (

4

).

• The indicators of buttons (

3

) and

(

5

) go off.

• The indicator of button (

4

) contin-

ues to flash.

• The display shows the setting of

the rinse aid dispenser.

Off

On

5.

Press button (

4

) to change the set-

ting.

6.

Deactivate the appliance to confirm.

7.

Adjust the released quantity of rinse
aid.

8.

Fill the rinse aid dispenser.

TECHNICAL INFORMATION

Dimensions

Width / Height / Depth (mm)

446 / 818 - 898 / 550

Electrical connection

Refer to the rating plate.

Water supply pressure

Min. / max. (bar / MPa)

(0.5 / 0.05 ) / (8 / 0.8 )

20

Summary of Contents for FAVORIT 55402 VI

























Reviews: