2.
Remove the filter (
C
) out of filter (
B
).
3.
Remove the flat filter (
A
).
4.
Wash the filters.
5.
Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6.
Put back in place the flat filter (
A
).
Make sure that it is correctly
positioned under the 2 guides.
7.
Reassemble the filters (
B
) and (
C
).
8.
Put back the filter (
B
) in the flat filter
(
A
). Turn it clockwise until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.
11.2
Cleaning the spray arms
Do not remove the spray arms. If the
holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
11.3
External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products,
abrasive cleaning pads or solvents.
11.4
Internal cleaning
• Carefully clean the appliance,
including the rubber gasket of the
door, with a soft moist cloth.
www.aeg.com
34
Downloaded from www.vandenborre.be
