The salt is used to recharge the resin in
the water softener and to assure good
washing results in the daily use.
How to fill the salt container
1.
Turn the cap of the salt container
counterclockwise and remove it.
2.
Put 1 litre of water in the salt
container (Only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap of the salt container
clockwise to close the salt container.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion.
To prevent it, after you fill
the salt container, start a
programme.
8.2
How to fill the rinse aid
dispenser
M AX
1
2
3
4
+
-
A
B
D
C
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
1.
Press the release button (
D
) to open
the lid (
C
).
2.
Fill the dispenser (
A
) until the rinse
aid reaches the marking ''MAX''.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity (
B
)
between position 1 (lowest
quantity) and position 4 or 6
(highest quantity).
9.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate
the appliance.
Make sure that the appliance is in user
mode.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent. If you use multi-
tablets, activate the option Multitab.
5.
Set and start the correct programme
for the type of load and the degree
of soil.
www.aeg.com
12
