To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clogged, remove remaining parts of soil with a
thin pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance and control panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive cleaning pads or solvents (acetone).
WHAT TO DO IF…
The start of the appliance does not occur or it stops during operation.
First try to find a solution to the problem (refer to the table). If not, contact the service
centre.
With some malfunctions, the display shows an alarm code:
•
- The appliance does not fill with water
•
- The appliance does not drain the water
•
- The anti-flood device is on.
WARNING!
Deactivate the appliance before you do the checks.
Malfunction
Possible cause
Possible solution
The appliance does not fill
with water.
The water tap is blocked or
there is limescale on it.
Clean the water tap.
The water pressure is too low.
Contact your local water au
-
thority.
The water tap is closed.
Open the water tap.
The filter in the water inlet
hose is blocked.
Clean the filter.
The connection of the water in
-
let hose is not correct.
Make sure that the connection
is correct.
The water inlet hose is dam
-
aged.
Make sure that the water inlet
hose has no damages.
The appliance does not drain
the water.
There is a blockage in the sink
spigot.
Clean the sink spigot.
The connection of the water
drain hose is not correct.
Make sure that the connection
is correct.
The water drain hose is dam
-
aged.
Make sure that the water
drain hose has no damages.
The anti-flood device is on.
Close the water tap and con
-
tact the service centre.
20
What to do if…
Summary of Contents for FAVORIT 88002
Page 1: ...FAVORIT 88002 EN DISHWASHER USER MANUAL ...
Page 26: ...26 ...
Page 27: ...27 ...
Page 28: ...www aeg electrolux com shop 117937580 A 312010 ...
