• Make sure that the spray arms can
move freely before you start a pro-
gramme.
8.4
Before starting a
programme
Make sure that:
• The filters are clean and correctly in-
stalled.
• The spray arms are not clogged.
• The position of the items in the bas-
kets is correct.
• The programme is applicable for the
type of load and for the degree of soil.
• The correct quantity of detergent is
used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tab-
lets).
• The cap of the salt container is tight.
9.
CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains sock-
et.
Dirty filters and clogged spray
arms decrease the washing re-
sults.
Make a check regularly and, if
necessary, clean them.
9.1
Cleaning the filters
A
B
C
C
1.
Turn the filter (
A
) counterclockwise
and remove it.
A1
A2
2.
To disassemble the filter (
A
), pull
apart (
A1
) and (
A2
).
3.
Remove the filter (
B
).
4.
Wash the filters with water.
5.
Put the filter (
B
) to its initial position.
Make sure that it assembles correct-
ly under the two guides (
C
).
ENGLISH
33
