background image

Guarantee Conditions

45

GUARANTEE CONDITIONS

Guarantee Conditions

AEG offer the following guarantee to the first purchaser of this appliance.

1.

The guarantee is valid for 12 months commencing when the appliance is handed over 
to the first retail purchaser, which must be verified by purchase invoice or similar doc-
umentation.
The guarantee does not cover commercial use.

2.

The guarantee covers all parts or components which fail due to faulty workmanship or 
faulty materials. The guarantee does not cover appliances where defects or poor per-
formance are due to misuse, accidental damage, neglect, faulty installation, 

unauthorised modification or attempted repair, commercial use or failure to observe 

requirements and recommendations set out in the instruction book.
This guarantee does not cover such parts as light bulbs, removable glassware or plastic, 
dust bags or filters. 

3.

Should guarantee repairs be necessary the purchaser must inform the nearest customer 
service office (manufacturer´s service or authorised agent). AEG reserves the right to 
stipulate the place of the repair (i. e. the customer´s home, place of installation or AEG 
workshop).

4.

The guarantee or free replacement includes both labour and materials.

5.

Repairs carried out under guarantee do not extend the guarantee period for the appli-
ance. Parts removed during guarantee repairs become the property of AEG.

6.

The purchaser´s statutory rights are not affected by this guarantee.

European Guarantee

If you should move to another country within Europe then your guarantee moves with 
you to your new home subject to the following qualifications:
– The guarantee starts from the date you first purchased your product.
– The guarantee is for the same period and to the same extent for labour and parts as 

exist in the new country of use for this brand or range of products.

– This guarantee relates to you and connot be transferred to another user.
– Your new home is within the European Community (EC) or European Free Trade Area.
– The product is installed and used in accordance with our instructions and is only used 

domestically, i. e. a normal household.

– The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care Centre, listed below, to 
give them details of your new home. They will then ensure that the local Service 
Organisation is aware of your move and able to look after you and your appliances.

France

Senlis

+33 (0) 44 62 29 29

Germany

Nürnberg

+49 (0) 800 234 7378

Italy

Pordenone

+39 (0) 800 117511

Sweden

Stockholm

+46 (0) 8 672 5360

UK

Slough

+44 (0) 1753 219899

Summary of Contents for FAVORIT FAVORIT 60870

















































Reviews: