6.3
Filling the rinse aid dispenser
A
B
D
C
M AX
1
2
3
4
+
-
A
B
D
C
1.
Press the release button (
D
) to open
the lid (
C
).
2.
Fill the rinse aid dispenser (
A
), no
more than the mark 'max'.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the
released quantity (
B
) between
position 1 (lowest quantity) and
position 4 or 6 (highest quantity).
7.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer
to ’SETTING AND STARTING A PRO-
GRAMME’.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
5.
Set and start the correct programme
for the type of load and the degree
of soil.
26 www.aeg.com
