7.1
Using the detergent
A B
D
30
20
C
M AX
1
2
3
4
+
-
B
2 0
0
3
A
D
C
1.
Press the release button (
B
) to open
the lid (
C
).
2.
Put the detergent in the compart-
ment (
A
) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent in the compartment (
D
).
4.
If you use detergent tablets, put the
tablet in the compartment (
A
).
5.
Close the lid. Make sure that the re-
lease button locks into position.
7.2
Setting and starting a
programme
Setting mode
The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• All the programme indicators come
on.
If the control panel shows other condi-
tions, press and hold function buttons
(
B
) and (
C
) at the same time until the ap-
pliance is in setting mode.
Starting a programme without
delay start
1.
Open the water tap.
2.
Press the on/off button to activate
the appliance.
3.
Make sure that the appliance is in
setting mode.
4.
Press the button of the programme
you want to set. The programme du-
ration flashes in the display.
5.
Close the appliance door. The pro-
gramme starts.
• If you open the door, the display
shows the programme duration
that decreases with steps of 1 mi-
nute.
Starting a programme with
delay start
1.
Set the programme.
2.
Press the delay button again and
again until the display shows the de-
lay time you want to set (from 1 to 19
hours).
• The delay time flashes in the dis-
play.
• The delay indicator is on.
3.
Close the appliance door. The count-
down starts.
• If you open the door, the display
shows the countdown of the delay
ENGLISH
27
