Refer to ‘HINTS AND TIPS’ for
other possible causes.
10.2
Activating the rinse aid
dispenser with the multitab
option activated
1.
Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
‘SETTING AND STARTING A PRO-
GRAMME'.
2.
Press and hold function buttons (
B
)
and (
C
) at the same time until the in-
dicators of function buttons (
A
), (
B
)
and (
C
) start to flash.
3.
Press function button (
B
).
• The indicators of function buttons
(
A
) and (
C
) go off.
• The indicator of function button (
B
)
continues to flash.
• The display shows the setting of
the rinse aid dispenser.
Off
On
4.
Press function button (
B
) to change
the setting.
5.
Deactivate the appliance to confirm
the setting.
6.
Adjust the released quantity of rinse
aid.
7.
Fill the rinse aid dispenser.
11.
TECHNICAL INFORMATION
Dimensions
Width / Height / Depth
(mm)
596 / 818 - 898 / 555
Electrical connection
Refer to the rating plate.
Voltage
220-240 V
Frequency
50 Hz
Water supply pressure
Min. / max. (bar / MPa)
(0.5 / 0.05 ) / (8 / 0.8 )
Water supply
1)
Cold water or hot water
2)
max. 60 °C
Capacity
Place settings
12
Power consumption
Left-on mode
0.99 W
Off-mode
0.10 W
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
2)
If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
12.
ENVIRONMENT CONCERNS
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
32 www.aeg.com
