AEG FEE84717PM, User Manual

If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse

aid empty notification

Make sure the appliance is in user mode.

1.

Press 

Start

.

• The indicators 

, 

 and

 are off.

• The indicator 

 still

flashes.

• The display shows the current

setting.

–

 = the rinse aid empty

notification is deactivated.

–

 = the rinse aid empty

notification is activated.

2.

Press 

Start

 to change the setting.

3.

Press on/off to confirm the setting.

6.4 

The rinse aid level

It is possible to set the released quantity

of rinse aid between level 1 (minimum

quantity) and level 6 (maximum quantity).

Level 0 deactivates the rinse aid

dispenser and no rinse aid is released.
Factory setting: level 4.

How to set the rinse aid level

Make sure the appliance is in user mode.

1.

Press 

Delay

.

• The indicators 

, 

and 

 are off.

• The indicator 

 still flashes.

• The display shows the current

setting: e.g. 

= level 4.

– The levels of rinse aid range

from 0A to 6A where level 0A

means no rinse aid is used.

2.

Press 

Delay

 repeatedly to change

the setting.

3.

Press on/off to confirm the setting.

6.5 

AirDry

AirDry improves the drying results with

less energy consumption.

During the drying phase, the

door opens automatically

and remains ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

If, afterwards, the door is

closed for another 3

minutes, the running

programme ends.

AirDry is automatically activated with all
programmes excluding 

 (if

applicable).
To improve the drying performance refer

to the XtraDry option or activate AirDry.

CAUTION!

If children have access to the

appliance, it is advised to

deactivate AirDry as opening

the door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1.

Press 

Option

.

• The indicators 

, 

and 

 are off.

• The indicator 

 still

flashes.

• The display shows the current

setting.

–

 = AirDry is deactivated.

–

 = AirDry is activated.

www.aeg.com

12