AEG FFB83730PW, User Manual

Water hardness

German de-

grees (°dH)

French degrees

(°fH)

mmol / l

Clarke de-

grees

Water softener lev-

el

47 - 50

84 - 90

8.4 - 9.0

58 - 63

10

43 - 46

76 - 83

7.6 - 8.3

53 - 57

9

37 - 42

65 - 75

6.5 - 7.5

46 - 52

8

29 - 36

51 - 64

5.1 - 6.4

36 - 45

7

23 - 28

40 - 50

4.0 - 5.0

28 - 35

6

19 - 22

33 - 39

3.3 - 3.9

23 - 27

5 

1)

15 - 18

26 - 32

2.6 - 3.2

18 - 22

4

11 - 14

19 - 25

1.9 - 2.5

13 - 17

3

4 - 10

7 - 18

0.7 - 1.8

5 - 12

2

<4

<7

<0.7

< 5

1 

2)

1) 

Factory setting.

2) 

Do not use salt at this level.

Regardless of the type of detergent

used, set the proper water hardness

level to keep the salt refill indicator

active.

Multi-tabs containing salt

are not effective enough to

soften hard water.

How to set the water softener

level

Make sure the appliance is in user mode.

1.

Press 

Program

.

• The indicators 

, 

 and

 are off.

• The indicator 

 still flashes.

• The display shows the current

setting: e.g. 

 = level 5.

2.

Press 

Program

 repeatedly to change

the setting.

3.

Press on/off to confirm the setting.

6.3 

The rinse aid empty

notification

The rinse aid helps to dry the dishes

without streaks and stains. It is

automatically released during the hot

rinse phase.
When the rinse aid chamber is empty,

the rinse aid indicator is turned on

notifying to refill rinse aid. If the drying

results are satisfactory while using multi-

tablets only, it is possible to deactivate

the notification for refilling rinse aid.

However, for best drying performance,

always use rinse aid.
If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse

aid empty notification

Make sure the appliance is in user mode.

1.

Press 

Start

.

• The indicators 

, 

 and

 are off.

• The indicator 

 still

flashes.

• The display shows the current

setting.

ENGLISH

11