AEG FFB93807PM, User Manual

in the same cycle or at the beginning of

the next programme. This activity

increases the total water consumption of

a programme by additional 4 litres and

the total energy consumption of a

programme by additional 2 Wh. The

rinsing of the softener ends with a

complete drain.
Each performed softener rinse (possible

more than one in the same cycle) may

prolong the programme duration by

another 5 minutes when it occurs at any

point at the beginning or in the middle of

a programme.

All the consumption values

mentioned in this section are

determined in line with the

currently applicable standard

in laboratory conditions with

water hardness 2.5mmol/L

(water softener: level 3)

according to the regulation:

UK Ecodesign 2021/745.

The pressure and the

temperature of water as well

as the variations of the

mains supply can change

the values.

How to set the water softener

level

Make sure the appliance is in user mode.

1. Press Program.

• The indicator 

 still flashes.

• The remaining indicators are off.

• The display shows the current

setting: e.g. 

 = level 5.

2. Press Program repeatedly to change

the setting.

3. Press the on/off button to confirm the

setting.

7.3 The rinse aid level

The rinse aid helps to dry the dishes

without streaks and stains. It is

automatically released during the hot

rinse phase.
You can set the released quantity of

rinse aid between level 1 (minimum

quantity) and level 6 (maximum quantity).

Factory setting: level 4.

When the rinse aid chamber is empty,

the rinse aid indicator is on, notifying to

refill rinse aid. If the drying results are

satisfactory while using multi-tablets only,

you can deactivate the dispenser and the

indicator. However, for the best drying

performance, always use rinse aid and

keep the rinse aid indicator active.
To deactivate the rinse aid dispenser and

indicator, set the level of rinse aid to 0.

How to set the rinse aid level

Make sure the appliance is in user mode.

1. Press Start.

• The indicator 

 still

flashes.

• The remaining indicators are off.

• The display shows the current

setting: e.g. 

= level 4.

2. Press Start repeatedly to change the

setting.

3. Press the on/off button to confirm the

setting.

7.4 AirDry

AirDry improves the drying results with

less energy consumption. The appliance

door opens automatically during the

drying phase and remains ajar.

AirDry is automatically activated with all
programmes other than 

 (if

applicable).
The duration of the drying phase and the

door opening time vary depending on the

selected programme and options.
When AirDry opens the door, the display

shows the remaining time of the running

programme.

ENGLISH

13