°C for at least 10 minutes during the last
rinsing phase.
How to activate ExtraHygiene
Press
, the related indicator comes on
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes out.
The display shows the updated
programme duration.
8.
BEFORE FIRST USE
1.
Fill the rinse aid dispenser.
2.
Open the water tap.
3.
Start a program to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
8.1
How to fill the rinse aid
dispenser
A
B
C
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
1.
Open the lid (
C
).
2.
Fill the dispenser (
B
) until the rinse
aid reaches the marking ''MAX''.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (
A
)
becomes clear.
If you use multi-tablets and
the drying performance is
satisfactory, the rinse aid
refill indication can be
disabled.
We recommend to always
use rinse aid for better
drying performance, also in
combination with multi-
tablets containing rinsing
agent.
9.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate
the appliance.
Make sure that the appliance is in
programme selection mode.
• If the rinse aid empty message is
shown fill the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
5.
Set and start the correct programme
for the type of load and the degree
of soil.
ENGLISH
13
