AEG FM2500DD-A, User Manual

What to do if …

14

What to do if

…

If you are unable to remedy the problem by following the above sugges
tions, please contact your dealer or the Customer Care Department.

1

Warning!

 Repairs to the appliance are only to be carried out by qualified service 

engineers. Considerable danger to the user may result from improper repairs. 

3

If the appliance has been wrongly operated, the visit from the customer service 
technician or dealer may not take place free of charge, even during the warranty 
period.

Problem

Possible cause

Remedy

The appliance cannot be 
switched on or is not operat
ing

More than 10 seconds have 
passed since the appliance was 
switched on

Switch appliance on again

Several sensor fields were 
touched at the same time

Only touch one sensor field

The sensor fields are partly 
covered by a damp cloth or 
with liquid

Remove the cloth or the liquid.
Switch appliance on again

Electronics fault

Disconnect appliance from the 
electrical supply for a few 
minutes. (Take the fuse out of 
the house’s wiring system.)
If the appliance still does not 
operate after switching on 
again, call the Customer Care 
Department

Fuses keep blowing

Too many electrical applianc
es are connected

Switch off electrical applianc
es

The fan is switched off, but the 
down draught extractor is 
raised

There was a power cut during 
operation

Switch on down draught ex
tractor and touch 

e

 is displayed

Filter sensor has responded.

Clean filter and reset filter 
sensor (see section “Cleaning 
and Care”)

Down draught extractor has 
switched off automatically 
and cannot be switched on 
again

Vertical adjustment of the 
down draught extractor has 
become jammed 

Disconnect appliance from the 
electrical supply for a few 
minutes. (Take the fuse out of 
the house’s wiring system.)
If the appliance still does not 
operate after switching on 
again, call the Customer Care 
Department