English
31
NOTE:
Once the set temperature has been reached, the
HEATING control lamp goes off . The power on lamp
remains on and shows that the device is working.
7. Now fi ll the deep-fry basket. Please ensure that
the basket is not fi lled above the hot fat. Open the
lid and insert the basket with the items to be fried
carefully into the recess.
8. Now close the lid. Release the handle (by pushing the
button (14) on the handle). The deep-fry basket is
now in the hot fat.
9. Set the timer. The times stated on the front of the
deep fat fryer are guidelines. The frying times are
to be found on the packaging of the food or in the
recipe. For times up to 30 min. you should turn the
switch in a clockwise direction. If you would like to
operate the deep fat fryer for longer, turn the switch
in an anticlockwise direction to ON.
NOTE:
• During the deep-frying process the HEATING
control lamp switches on and off several times.
This is normal and it indicates that the tem-
perature is controlled by the thermostat and is
being maintained.
• Once the set time (up to 30 min.) has been
reached, an acoustic signal is heard. The heating
phase is over.
10. After the frying time has expired, you can allow the
oil to drain off the deep-fried food. In order to do
so, hang the deep frying basket on the edge of the
frying fat container (as described under point 3).
11. Open the lid carefully.
WARNING:
As it is possible that hot steam will be released
12. Now remove the deep-frying basket.
Switching Off
If you would like to stop the frying process, turn the
temperature regulator to the minimum setting (0)
and switch the timer off if necessary (OFF). Remove
the mains plug from the socket. Allow the frying oil a
considerable time to cool down. Before continuing to use
the full frying pot, please ensure that it is no longer at a
dangerous temperature.
Mains Lead Take-up Device
Wind the mains lead up again on the rear of the deep
fat fryer.
Cleaning
WARNING:
Always pull out the plug from the mains socket before
cleaning and wait until the unit has cooled down.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any acidic or abrasive detergents.
• Under no circumstances should the device be
immersed in water for cleaning.
Deep frying fat container
• In order to change the oil, pull out the deep frying
fat container and pour the oil out at the side.
• The frying fat container and deep frying basket can
be cleaned in the normal way in soapy water.
• Reinsert the frying fat container in such a way that
the MIN and MAX Mark is located at the rear end of
the deep fat fryer.
Housing
Clean the housing and lid after use with a damp cloth
and domestic washing-up liquid if necessary. Do not
remove the lid seal. It might tear.
Changing the Odour and Fat Vapour Filter
The fi lter in the lid can be replaced.
• Remove
fi lter cover (2).
• Replace the fi lter.
• Then reassemble the cover.
NOTE:
When these fi lters have been used up it is possible to
cut universal fi lters to size, e.g. from cooker hoods.
Technical Data
Model: .................................................................................... FR 5553
Power supply: ............................................................. 230 V, 50 Hz
Power consumption:..........................................................2000 W
Protection class: ................................................................................
Ι
Filling quantity: ........................................................... max. 3 Litre
Net weight: ............................................................................. 4,1 kg
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
05-FR 5553 AEG.indd 31
05-FR 5553 AEG.indd 31
12.08.2009 11:01:17 Uhr
12.08.2009 11:01:17 Uhr
