background image

Programme 

1)

 

2)

Water (l)

Energy (kWh)

Duration (min)

1h

10.4 - 12.7

0.83 - 0.96

60

1h 30min

10.3 - 12.6

0.96 - 1.09

90

2h 40min

9.8 - 12.0

1.05 - 1.18

160

ECO

10.5

0.950

240

AUTO Sense

8.7 - 12.0

0.75 - 1.18

120 - 170

Machine Care

8.9 - 10.9

0.60 - 0.72

60

1) The pressure and the temperature of the water, the variations of the mains supply, the options, the
quantity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.

Information for test institutes

To receive the necessary information for

conducting performance tests (e.g.

according to: EN60436 ), send an email

to:
info.test@dishwasher-production.com

In your request, include the product

number code (PNC) from the rating plate.
For any other questions regarding your

dishwasher, refer to the service book

provided with your appliance.

6. BASIC SETTINGS

You can configure the appliance by

changing basic settings according to

your needs.

Number Settings

Values

Description

1)

1

Water hardness From level 1L to

level 10L (de‐

fault: 5L)

Adjust the level of the water softener ac‐

cording to the water hardness in your area.

2

Rinse aid empty

notification

On (default)

Off

Activate or deactivate the rinse aid indica‐

tor.

3

End sound

On

Off (default)

Activate or deactivate the acoustic signal

for the end of a programme.

4

Auto door open On (default)

Off

Activate or deactivate the AirDry.

5

Key tones

On (default)

Off

Activate or deactivate the sound of the but‐

tons when pressed.

6

Latest pro‐

gramme selec‐

tion

On

Off (default)

Enable or disable the automatic selection

of the most recently used programme and

options.

1) For more details, refer to the information provided in this chapter.

www.aeg.com

10

Summary of Contents for FSB52917Z





























Reviews: