Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
info.test@dishwasher-production.com
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number Settings
Values
Description
1)
1
Water hardness From level 1 to
level 10 (de‐
fault: 5)
Adjust the level of the water softener ac‐
cording to the water hardness in your area.
2
Rinse aid level
From level 0 to
level 8 (default:
5)
Adjust the level of the rinse aid according
to the necessary dosage.
3
End sound
On
Off (default)
Activate or deactivate the acoustic signal
for the end of a programme.
4
Auto door open On (default)
Off
Activate or deactivate the AirDry.
5
Key tones
On (default)
Off
Activate or deactivate the sound of the but‐
tons when pressed.
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the indicators on the control panel
represent available settings. For each
setting, a dedicated indicator flashes:
1
3
2
4
5
6.1 The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
ENGLISH
9
