20
30
B
A
D
C
1.
Press the release button (
B
) to open
the lid (
C
).
2.
Put the detergent, in powder or
tablets, in the compartment (
A
).
3.
If the programme has a prewash
phase, put a small quantity of
detergent in the compartment (
D
).
4.
Close the lid. Make sure that the
release button locks into position.
9.2
Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1.
Keep the appliance door ajar.
2.
Press the on/off button to activate
the appliance. Make sure that the
appliance is in programme selection
mode.
3.
Press repeatedly
or
until the
display shows the number of the
chosen programme. The display
shows the programme number for
approximately 3 seconds and then
shows the programme duration.
4.
Set the applicable options.
5.
Close the appliance door to start the
programme.
Starting a programme with
delay start
1.
Set a programme.
2.
Press
again and again until the
display shows the delay time you
want to set (from 1 to 24 hours).
The delay indicator comes on.
3.
Close the appliance door to start the
countdown.
While a countdown is running it is
possible to increase the delay time but
not to change the selection of the
programme and options.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry
function.
Do not try to close the
appliance door within 2
minutes after AirDry
automatically opens it, as
this may cause damage to
the appliance.
If, afterwards, the door is
closed for another 3
minutes, the running
programme ends.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you
have to set the programme and options
again.
Press and hold
RESET
until the appliance
is in programme selection mode.
ENGLISH
57
