Programme
1)
Water (l)
Energy (kWh)
Duration (min)
AUTO Sense
10.4 - 13.3
0.76 - 1.22
120 - 170
Machine Care
9.7 - 11.8
0.60 - 0.73
60
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6.
BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number Setting
Values
Description
1)
1
Water hardness From level 1L to
level 10L (de-
fault: 5L)
Adjust the level of the water softener ac-
cording to the water hardness in your area.
2
Rinse aid level
From level 0A
to level 6A (de-
fault: 4A)
Adjust the level of the rinse aid according
to the necessary dosage.
3
End sound
On
Off (default)
Activate or deactivate the acoustic signal
for the end of a programme.
4
Auto door open On (default)
Off
Activate or deactivate the AirDry.
5
Key tones
On (default)
Off
Activate or deactivate the sound of the
buttons when pressed.
6
Latest pro-
gramme selec-
tion
On
Off (default)
Enable or disable the automatic selection
of the most recently used programme and
options.
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
dedicated bar of the ECOMETER flashes.
www.aeg.com
10
