4.
Open the water tap.
5.
Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
After starting a programme, it may take
up to 5 minutes for the appliance to
recharge the resin in the water softener.
It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure is repeated periodically.
8.1
The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1.
Turn the cap of the salt container
counterclockwise and remove it.
2.
Put 1 litre of water in the salt
container (only for the first time).
3.
Fill the salt container with dishwasher
salt (until it is full).
4.
Carefully shake the funnel by its
handle to get the last granules
inside.
5.
Remove the salt around the opening
of the salt container.
6.
Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start the shortest
programme to prevent
corrosion. Do not put dishes
in the baskets.
8.2
How to fill the rinse aid
dispenser
A
B
C
CAUTION!
Only use rinse aid designed
specifically for dishwashers.
1.
Open the lid (
C
).
2.
Fill the dispenser (
B
) until the rinse
aid reaches the marking ''MAX''.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4.
Close the lid. Make sure that the lid
locks into position.
ENGLISH
39
Summary of Contents for FSE83700P
Page 75: ...FRANÇAIS 75 ...
