AEG FSS52610Z, User Manual

• The indicator 

 still flashes.

• The display shows the current

setting.

–

 = rinse aid empty

notification activated.

–

 = rinse aid empty

notification deactivated.

3.

Press 

 to change the setting.

4.

Press on/off to confirm the setting.

6.4 

Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.
There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic

signal is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

The appliance must be in programme

selection mode.

1.

To enter the user mode, press and
hold simultaneously 

 and 

 until

the indicators 

, 

, 

 and 

flash and the display is blank.

2.

Press 

 .

• The indicators 

, 

 and 

 are

off.

• The indicator 

 still flashes.

• The display shows the current

setting:

–

 = Acoustic signal off.

–

 = Acoustic signal on.

3.

Press 

 to change the setting.

4.

Press on/off to confirm the setting.

6.5 

AirDry

AirDry improves the drying results with

less energy consumption.

During the drying phase, the

door opens automatically

and remains ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

AirDry is automatically activated with all
programmes excluding 

.

To improve the drying performance refer

to the XtraDry option or activate AirDry.

CAUTION!

If children have access to the

appliance, it is advised to

deactivate AirDry as opening

the door may pose a danger.

How to deactivate AirDry

The appliance must be in programme

selection mode.

1.

To enter the user mode, press and
hold simultaneously 

 and 

 until

the indicators 

, 

, 

 and 

start flashing and the display is blank.

2.

Press 

.

• The indicators 

, 

 and 

are off.

• The indicator 

 still flashes.

• The display shows the current

setting: 

 = AirDry activated.

3.

Press 

 to change the setting: 

= AirDry deactivated.

4.

Press on/off to confirm the setting.

www.aeg.com

10