AEG FSS52610Z, User Manual

CAUTION!

An incorrect position of the

filters can cause bad

washing results and damage

to the appliance.

11.2 

Cleaning the spray arms

Do not remove the spray arms. If the

holes in the spray arms are clogged,

remove remaining parts of soil with a thin

pointed object.

11.3 

External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products,

abrasive cleaning pads or solvents.

11.4 

Internal cleaning

• Carefully clean the appliance,

including the rubber gasket of the

door, with a soft damp cloth.

• If you regularly use short duration

programmes, these can leave

deposits of grease and limescale

inside the appliance. To prevent this,

we recommend to run long duration

programmes at least 2 times per

month.

• To maintain the performance of your

appliance at its best, we recommend

to use monthly a specific cleaning

product for dishwashers. Follow

carefully the instructions on the

packaging of the product.

12. 

TROUBLESHOOTING

If the appliance does not start or it stops

during operation, first check if you can

solve the problem by yourself with the

help of the information in the table or

contact an Authorised Service Centre.

WARNING!

Repairs not properly done

may result in serious risk to

the safety of the user. Any

repairs must be performed

by qualified personnel.

With some problems, the display

shows an alarm code.
The majority of problems that can

occur can be solved without the need

to contact an Authorised Service

Centre.

Problem and alarm code

Possible cause and solution

You cannot activate the ap-
pliance.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no damaged fuse in the fuse

box.

ENGLISH

17