AEG FSS53627Z, User Manual

Problem and alarm code

Possible cause and solution

The level of water inside the
appliance is too high.
The display shows 

iF1

.

• Switch the appliance off and on.
• Make sure that the filters are clean.
• Make sure that the outlet hose is installed at the right

height above the floor. Refer to the installation instruc-
tions.

The appliance stops and
starts more times during op-
eration.

• It is normal. It provides optimal cleaning results and en-

ergy savings.

The programme lasts too
long.

• If the delay start option is set, cancel the delay setting or

wait for the end of the countdown.

• Activating options can increase the programme dura-

tion.

The remaining time in the
display increases and skips
nearly to the end of the pro-
gramme duration.

• This is not a defect. The appliance is working correctly.

Small leak from the appli-
ance door.

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• The appliance door is not centred on the tub. Adjust the

rear foot (if applicable).

The appliance door is diffi-
cult to close.

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• Parts of the tableware are protruding from the baskets.

Rattling or knocking sounds
from the inside of the appli-
ance.

• The tableware is not properly arranged in the baskets.

Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

The appliance trips the cir-
cuit-beaker.

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian-
ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.
For alarm codes not described in the

table, contact an Authorised Service

Centre.

WARNING!

We do not recommend

using the appliance until the

problem has been

completely fixed. Unplug the

appliance and do not plug it

in again until you are certain

that it operates correctly.

ENGLISH

23