background image

11.3 

External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products,

abrasive cleaning pads or solvents.

11.4 

Internal cleaning

• Carefully clean the appliance,

including the rubber gasket of the

door, with a soft damp cloth.

• If you use short duration programmes

regularly, these can leave deposits of

grease and limescale inside the

appliance. To prevent this, we

recommend running long duration

programmes at least twice a month.

• To maintain the performance of your

appliance at its best, we recommend

using a specific cleaning product for

dishwashers (at least once a month).

Follow carefully the instructions on

the packaging of the product.

12. 

TROUBLESHOOTING

If the appliance does not start or it stops

during operation, first check if you can

solve the problem by yourself with the

help of the information in the table or

contact an Authorised Service Centre.

WARNING!

Repairs not properly done

may result in serious risk to

the safety of the user. Any

repairs must be performed

by qualified personnel.

With some problems, the display

shows an alarm code.
The majority of problems that can

occur can be solved without the need

to contact an Authorised Service

Centre.

Problem and alarm code

Possible cause and solution

You cannot activate the ap-
pliance.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no damaged fuse in the fuse

box.

The program does not start. • Make sure that the appliance door is closed.

• If the delay start is set, cancel the setting or wait for the

end of the countdown.

• The appliance has started the procedure to recharge

the resin inside the water softener. The duration of the
procedure is approximately 5 minutes.

ENGLISH

19

Summary of Contents for FSS62700P

























Reviews: