• Make sure that the spray arms can
move freely before you start a
programme.
10.5
Before starting a
programme
Make sure that:
• The filters are clean and correctly
installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is dishwasher salt and rinse aid
(unless you use multi- tablets).
• The position of the items in the
baskets is correct.
• The programme is applicable for the
type of load and for the degree of
soil.
• The correct quantity of detergent is
used.
10.6
Unloading the baskets
1.
Let the tableware cool down before
you remove it from the appliance.
Hot items can be easily damaged.
2.
First remove items from the lower
basket, then from the upper basket.
At the end of the program
water can still remain on the
sides and on the door of the
appliance.
11.
CARE AND CLEANING
WARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.
Dirty filters and clogged
spray arms decrease the
washing results. Make a
check regularly and, if
necessary, clean them.
11.1
Cleaning the filters
The filter system is made of 3 parts.
C
B
A
1.
Turn the filter (
B
) counterclockwise
and remove it.
2.
Remove the filter (
C
) out of filter (
B
).
3.
Remove the flat filter (
A
).
4.
Wash the filters.
ENGLISH
17
