background image

• Put hollow items (cups, glasses and

pans) with the opening facing

downwards.

• Make sure that glass items do not

touch each other.

• Put light items in the upper basket.

Make sure that the items do not move

freely.

• Put cutlery and small items in the

cutlery basket.

• Move the upper basket upwards to

accommodate large items in the lower

basket.

• Make sure that the spray arms can

move freely before you start a

programme.

9.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance. Hot

items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

After the programme is

completed, water can still

remain on the inside

surfaces of the appliance.

10. CARE AND CLEANING

WARNING!

Before any maintenance

other than running the

programme Machine Care,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged

spray arms negatively affect

the washing results. Check

these elements regularly

and, if necessary, clean

them.

10.1 Machine Care

Machine Care is a programme designed

to clean the appliance interior with

optimal results. It removes limescale and

grease buildup.
When the appliance senses the need for
cleaning, the indicator   is on. Start the

Machine Care programme to clean the

appliance interior.

How to start the Machine

Care programme

Before starting the Machine

Care programme, clean the

filters and spray arms.

1. Use a descaler or a cleaning product

designed specifically for

dishwashers. Follow the instructions

on the packaging. Do not put dishes

in the baskets.

2. Press and hold simultaneously 

and 

 for about 3 seconds.

The indicators   and 

 flash. The

display shows the programme duration.

3. Close the appliance door to start the

programme.

When the programme is complete, the
indicator   is off.

10.2 Internal cleaning

• Carefully clean the appliance,

including the rubber gasket of the

door, with a soft damp cloth.

• Do not use abrasive products,

abrasive cleaning pads, sharp tools,

strong chemicals, scourer or solvents.

• To maintain the performance of your

appliance, use a cleaning product

designed specifically for dishwashers

at least once every two months.

Carefully follow the instructions on the

packaging of the product.

• For optimal cleaning results, start the

Machine Care programme.

10.3 Removal of foreign

objects

Check the filters and the sump after each

use of the dishwasher. Foreign objects

(e.g. pieces of glass, plastic, bones or

ENGLISH

19

Summary of Contents for FSS63607P





























Reviews: