with disinfectants, stain or rust
removers and immersion cleaners.
6.2
Pan supports
The pan supports are not
resistant to washing in a
dishwasher. They must be
washed by hand.
1.
Remove the pan supports to easily
clean the hob.
Be very careful when you
replace the pan supports
to prevent the hob top
from damage.
2.
The enamel coating occasionally can
have rough edges, so be careful
when you wash the pan supports by
hand and dry them. If necessary,
remove stubborn stains with a paste
cleaner.
3.
After you clean the pan supports,
make sure that they are in correct
positions.
4.
For the burner to operate correctly,
make sure that the arms of the pan
supports are aligned with the centre
of the burner.
6.3
Removing pan supports
For easier cleaning, pan supports can be
removed from the hob. Lift up the pan
supports keeping them in horizontal
position and with the right order as
shown in the graphic.
11
2
1
2
1
2
The shape of pan supports and the
amount of burners can be different in
other models of the appliance.
6.4
Cleaning the hob
•
Remove immediately:
melted plastic,
plastic foil, sugar and food with sugar.
If not, the dirt can cause damage to
the hob. Take care to avoid burns.
•
Remove when the hob is sufficiently
cool:
limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
cloth.
• To clean the enamelled parts, cap
and crown, wash them with warm
soapy water and dry them carefully
before you put them back on.
6.5
Cleaning the spark plug
This feature is obtained through a
ceramic ignition candle with a metal
www.aeg.com
10
