with disinfectants, stain or rust
removers and immersion cleaners.
7.2
Pan supports
The pan supports are not
resistant to washing in a
dishwasher. They must be
washed by hand.
1.
Remove the pan supports to easily
clean the hob.
Be very careful when you
replace the pan supports
to prevent the hob top
from damage.
2.
The enamel coating occasionally can
have rough edges, so be careful
when you wash the pan supports by
hand and dry them. If necessary,
remove stubborn stains with a paste
cleaner.
3.
After you clean the pan supports,
make sure that they are in correct
positions.
4.
For the burner to operate correctly,
make sure that the arms of the pan
supports are aligned with the centre
of the burner.
7.3
Removing pan supports
To keep the pan supports in the correct
position, they are put on metal pins
installed in the rear and lateral sides of
the hob. For easier cleaning, pan
supports can be removed from the hob.
Lift up the pan supports keeping them in
horizontal position as shown in the
graphic.
Do not lift the pan supports
at an angle, as this will put
strain on the metal pins. This
can cause damage to the
pins and cause them to
break.
The shape of pan supports and the
amount of burners can be different in
other models of the appliance.
7.4
Cleaning the hob
•
Remove immediately:
melted plastic,
plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
ENGLISH
15
