AEG HKL85410FB, User Manual

setting in the beginning and then

continues to cook at the desired heating

setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking
zone:

 touch   (  comes on).

Immediately touch a desired heat
setting. After 3 seconds   comes on.

To deactivate the function:

 change the

heat setting.

4.7 

Power function

This function makes more power

available to the induction cooking zones.

The function can be activated for the

induction cooking zone only for a limited

period of time. After this time the

induction cooking zone automatically

sets back to the highest heat setting.

Refer to “Technical

information” chapter.

To activate the function for a cooking
zone:

 touch  .   comes on.

To deactivate the function:

 change the

heat setting.

4.8 

Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.
First set the heat setting for the cooking

zone then set the function.

To set the cooking zone:

 touch 

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function:

 touch   of

the timer to set the time (00 - 99

minutes). When the indicator of the

cooking zone starts to flash slowly the

time counts down.

To see the remaining time:

 set the

cooking zone with  . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To change the time:

 set the cooking

zone with  . Touch   or  .

To deactivate the function:

 set the

cooking zone with   and touch  . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking zone

deactivates.

To stop the sound:

 touch  .

CountUp Timer (The count up timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone:

 touch 

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function:

 touch   of

the timer.   comes on. When the

indicator of the cooking zone starts to

flash slowly the time counts up. The
display switches between   and

counted time (minutes).

To see how long the cooking zone
operates:

 set the cooking zone with  .

The indicator of the cooking zone starts

to flash quickly. The display shows how

long the zone operates.

To deactivate the function:

 set the

cooking zone with   and touch   or

. The indicator of the cooking zone

goes out.

Minute Minder

You can use this function as a 

Minute

Minder

 when the hob is activated and

the cooking zones do not operate. The
heat setting display shows  .

To activate the function:

 touch  .

Touch   or   of the timer to set the

time. When the time comes to an end,

the sound operates and 

00

 flashes.

To stop the sound:

 touch  .

www.aeg.com

10