Problem
Possible cause
Remedy
FlexiBridge operates. One
or more sections of the func-
tion mode which operates
are not covered by the cook-
ware.
Place the cookware on the
correct number of sections
of the function mode which
operates or change the func-
tion mode. Refer to "Flexi-
ble induction cooking area".
PowerSlide operates. Two
pots are placed on the flexi-
ble induction cooking area.
Use only one pot. Refer to
"Flexible induction cooking
area".
and a number come on.
There is an error in the hob.
Deactivate the hob and acti-
vate it again after 30 sec-
onds. If
comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin-
ues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.
12.2
If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
13.
TECHNICAL DATA
13.1
Rating plate
Model IAE64851XB
PNC 949 597 572 00
Typ 62 B4A 05 CA
220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW
Made in Germany
Ser.Nr. .................
7.35 kW
AEG
13.2
Software Licences
The software included in the hob
contains copyrighted software that is
licensed under the BSD, fontconfig, FTL,
GPL-2.0, LGPL-2.0, LGPL-2.1, libJpeg,
zLib/ libpng, MIT, OpenSSL / SSLEAY
ISC, Apache 2.0 and others.
Check the full copy of the licence in:
Menu > Settings > Service > License.
ENGLISH
23
