--------------------------------------------------------------------------12/17------------------------------------------------------------------------------------
1.6
Operation of BLE HID-Keyboard Interface
In the operation mode
online/BLE keyboard
with an active connection every scanned transponder
number is sent as a keyboard input to the connected device.
To get the number displayed on the connected device there the focus should set on a text field.
A successful reading …
410 100090355403
Online/BLE KeyB*
this will be transmitted as:
1000000410100090355403
Note:
If the focus on the connected device is not set to a text box, or similar, the keystrokes while
transmitting the transponder ID could cause unwanted actions.
As long as the ARE H9 BLE detects an active Bluetooth connection it will signal this at the
reading mode by the symbol
*
in the lower right corner of the screen.
If the die Bluetooth connection at the operating mode
Online/BLE keyboard
is disconnected, for
example by leaving the range of the radio signal or by switching the device off, and a transponder
ID should transmitted the ARE H9 BLE will be waiting until the connection will be re-established,
during this the following screen is displayed:
Await Connection
Cancel ?
If the connection is re-established the ARE H9 BLE transmits automatically the ID number. The
waiting for a connection could be cancelled by the user any time.
As selected the operating mode
Online/BLE keyboard
is saved in the ARE H9, therefor during
switching on the ARE H9 it will first wait about a an active connection.
