AEG IKE84471FB, User Manual

The indicator disappears when the cooking

zone has cooled down.

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Activating and deactivating

Touch   for 1 second to activate or

deactivate the hob.

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:
• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something on

the control panel for more than 10

seconds (a pan, a cloth, etc.). An acoustic

signal sounds and the hob deactivates.

Remove the object or clean the control

panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking zone

cool down before you use the hob again.

• you use incorrect cookware. The symbol

 comes on and the cooking zone

deactivates automatically after 2 minutes.

• you do not deactivate a cooking zone or

change the heat setting. After some time

 comes on and the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting

The hob deactivates

after

, 1 - 3

6 hours

4 - 7

5 hours

8 - 9

4 hours

10 - 14

1.5 hour

5.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the control

bar until you reach the correct heat setting.

5.4 Using the cooking zones

Place the cookware in the centre of the

selected zone. Induction cooking zones

adapt to the dimension of the bottom of the

cookware automatically.

5.5 Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the

zone operates on the highest setting in the

beginning and then continues to cook at the

desired heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking
zone: touch   (  comes on). Immediately

touch a desired heat setting. After 3 seconds

 comes on.

To deactivate the function: change the

heat setting.

5.6 PowerBoost

This function makes more power available to

the induction cooking zones. The function

can be activated for the induction cooking

zone only for a limited period of time. After

this time the induction cooking zone

automatically sets back to the highest heat

setting.

Refer to “Technical data”

chapter.

10

ENGLISH