AEG IKE84471FB, User Manual

To deactivate the function: activate the hob
with  . Do not set any heat setting. Touch

 for 4 seconds.   comes on. Deactivate

the hob with  .
To override the function for only one
cooking time: activate the hob with  . 
comes on. Touch   for 4 seconds. Set the

heat setting in 10 seconds. You can

operate the hob. When you deactivate the
hob with   the function operates again.

5.10 OffSound Control

(Deactivating and activating the

sounds)

Deactivate the hob. Touch   for 3 seconds.

The display comes on and goes out. Touch

 for 3 seconds.   or   comes on. Touch

 of the timer to choose one of the

following:
•

 - the sounds are off

•

 - the sounds are on

To confirm your selection wait until the hob

deactivates automatically.

When the function is set to   you can hear

the sounds only when:
• you touch 

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control panel.

5.11 Power management

If multiple zones are active and the

consumed power exceeds the limitation of

the power supply, this function divides the

available power between all cooking zones.

The hob controls heat settings to protect the

fuses of the house installation.
• Cooking zones are grouped according to

the location and number of the phases in

the hob. Each phase has a maximum

electricity loading (3700 W). If the hob

reaches the limit of maximum available

power within one phase, the power of the

cooking zones will be automatically

reduced.

• The heat setting of the cooking zone

selected last is always prioritised. The

remaining power will be divided between

the previously activated cooking zones in

reverse order of selection.

• The heat setting display of the reduced

zones changes between the initially

selected heat setting and the reduced

heat setting.

• Wait until the display stops flashing or

reduce the heat setting of the cooking

zone selected last. The cooking zones will

continue operating with the reduced heat

setting. Change the heat settings of the

cooking zones manually, if necessary.

Refer to the illustration for possible

combinations in which power can be

distributed among the cooking zones.

5.12 Hob²Hood

It is an advanced automatic function which

connects the hob to a special hood. Both the

hob and the hood have an infrared signal

communicator. Speed of the fan is defined

automatically on basis of mode setting and

temperature of the hottest cookware on the

hob. You can also operate the fan from the

hob manually.

For most of the hoods the

remote system is originally

deactivated. Activate it before

you use the function. For more

information refer to hood user

manual.

Operating the function automatically

To operate the function automatically set the

automatic mode to H1 – H6. The hob is

originally set to H5. The hood reacts

whenever you operate the hob. The hob

recognizes temperature of the cookware

12

ENGLISH