AEG IKE84471FB, User Manual

6.5   PowerSlide

This function allows you to adjust the

temperature by moving the cookware to a

different position on the induction cooking

area.
The function divides the induction cooking

area into three areas with different heat

settings. The hob detects the position of the

cookware and adjust the heat setting

corresponding with the position. You can

place the cookware in the front, middle or

rear position. If you place the cookware in the

front you get the highest heat setting. To

decrease it, move the cookware to middle or

rear position.

Use only one pot when you

operate the function.

General information:
• 160 mm is the minimum bottom diameter

of the cookware for this function.

• Heat setting display for the left rear

control bar shows the position of the

cookware on the induction cooking area.

Front 

, middle 

, rear 

.

• Heat setting display for the left front

control bar shows the heat setting. To

change the heat setting use left front

control bar.

• When you activate the function for the first

time you will get heat setting 

 for the

front position,   for the middle position
and   for the rear position.

You can change the heat settings for each

position separately. The hob will

remember your heat settings next time

you activate the function.

Activating the function
To activate the function place the cookware

in the correct position on the cooking area.
Touch  . The indicator above the symbol

comes on. If you do not place the cookware
on the cooking area   comes on and after 2

minutes the flexible induction cooking area is
set to  .
Deactivating the function

To deactivate the function touch   or set the
heat setting to  . The indicator above the
symbol   goes off.

16

ENGLISH