AEG IKE84471FB, User Manual

Problem

Possible cause

Remedy

An acoustic signal sounds and

the hob deactivates.

An acoustic signal sounds when

the hob is deactivated.

You put something on one or more

sensor fields.

Remove the object from the sensor

fields.

The hob deactivates.

You put something on the sensor
field 

.

Remove the object from the sensor

field.

Residual heat indicator does not

come on.

The zone is not hot because it oper‐

ated only for a short time or the sen‐

sor is damaged.

If the zone operated sufficiently long to

be hot, speak to an Authorised Service

Centre.

Hob²Hood does not work.

You covered the control panel.

Remove the object from the control

panel.

You use a very tall pot which blocks

the signal.

Use a smaller pot, change the cooking

zone or operate the hood manually.

Automatic Heat Up does not op‐

erate.

The zone is hot.

Let the zone become sufficiently cool.

The highest heat setting is set.

The highest heat setting has the same

power as the function.

The heat setting changes be‐

tween two levels.

Power management operates.

Refer to "Daily use".

The sensor fields become hot.

The cookware is too large or you put

it too near to the controls.

Put large cookware on the rear zones,

if possible.

There is no sound when you

touch the panel sensor fields.

The sounds are deactivated.

Activate the sounds. Refer to "Daily

use".

The flexible induction cooking

area does not heat up the cook‐

ware.

The cookware is in a wrong position

on the flexible induction cooking

area.

Place the cookware in the correct posi‐

tion on the flexible induction cooking

area. The position of the cookware de‐

pends on the activated function or

function mode. Refer to "Flexible in‐

duction cooking area".

The diameter of the bottom of the

cookware is incorrect for the activa‐

ted function or function mode.

Use cookware with a diameter applica‐

ble to the activated function or function

mode. Refer to "Flexible induction

cooking area".

 comes on.

Child Safety Device or Lock oper‐

ates.

Refer to "Daily use".

 comes on.

There is no cookware on the zone.

Put cookware on the zone.

The cookware is unsuitable.

Use suitable cookware. Refer to "Hints

and tips".

The diameter of the bottom of the

cookware is too small for the zone.

Use cookware with correct dimen‐

sions. Refer to "Technical data".

FlexiBridge (Flexible Bridge) oper‐

ates. One or more sections of the

function mode which operates are

not covered by the cookware.

Place the cookware on the correct

number of sections of the function

mode which operates or change the

function mode. Refer to "Flexible in‐

duction cooking area".

20

ENGLISH