AEG IKE95751FB, User Manual

For most of the hoods the

remote system is originally

deactivated. Activate it before

you use the function. For more

information refer to hood user

manual.

Operating the function automatically

To operate the function automatically set the

automatic mode to H1 – H6. The hob is

originally set to H5. The hood reacts

whenever you operate the hob. The hob

recognizes temperature of the cookware

automatically and adjusts the speed of the

fan.
Automatic modes

Automat‐

ic light

Boiling1) Frying2)

Mode H0

Off

Off

Off

Mode H1

On

Off

Off

Mode
H2 

3)

On

Fan speed

1

Fan speed

1

Mode H3

On

Off

Fan speed

1

Mode H4

On

Fan speed

1

Fan speed

1

Mode H5

On

Fan speed

1

Fan speed

2

Mode H6

On

Fan speed

2

Fan speed

3

1) The hob detects the boiling process and acti‐

vates fan speed in accordance with automatic

mode.

2) The hob detects the frying process and acti‐

vates fan speed in accordance with automatic

mode.

3) This mode activates the fan and the light and

does not rely on the temperature.
Changing the automatic mode

1. Deactivate the hob.

2. Press   for 3 seconds. The display

comes on and goes off.

3. Press   for 3 seconds.
4. Press   a few times until h comes on.
5. Press   of the timer to select an

automatic mode.

To operate the hood directly on

the hood panel deactivate the

automatic mode of the function.

When you finish cooking and

deactivate the hob, the hood fan

may still operate for a certain

period of time. After that time the

system deactivates the fan

automatically and prevents you

from accidental activation of the

fan for the next 30 seconds.

Operating the fan speed manually

You can also operate the function manually.
To do that press   when the hob is active.

This deactivates automatic operation of the

function and allows you to change the fan
speed manually. When you press   you

raise the fan speed by one. When you reach
an intensive level and press   again you will

set fan speed to 0 which deactivates the

hood fan. To start the fan again with fan
speed 1 press  .

To activate automatic operation

of the function, deactivate the

hob and activate it again.

Activating the light

You can set the hob to activate the light

automatically whenever you activate the hob.

To do so set the automatic mode to H1 – H6.

The light on the hood

deactivates 2 minutes after

deactivating the hob.

7. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

14

ENGLISH