English
38
NOTE:
Alternatively press the iPOD button (20 on RC) to select
iPod mode.
3. Depending on the iPod/iPhone/iPad Model, firstly re-
lease the button lock and start playing music if necessary
with the
button (6/6).
4. Follow your iPod/iPhone/iPad manual for further use of
the controls.
CAUTION:
Return to radio mode before disconnecting your iPod/
iPhone/iPad from this device to avoid damages to your
iPod/iPhone/iPad.
NOTE:
If you have an incoming call when playing back music with
the iPhone docked, then playback stops and you can hear
the ring tone.
Description of iPod/iPhone/iPad Controls
(6/6)
You can pause and continue music playback. Press again to
continue playback.
SEARCH- (5 on FB)
Press 1 x =
Restart of the song from the beginning.
Press 2 x =
Skip to the previous song.
Press 3 x =
Skip to the song before the previous song,
etc. Press and hold during playback to search
in reverse through the song.
(5 on FB)
Press to skip to the next song and the following songs. Press
and hold during playback to search forward through the
song.
REPEAT (16 on RC)
Activates the Repeat function.
MENU (17 on RC)
Press this button to bring up the iPod/iPhone/iPad Menu or
to return to the previous menu.
NOTE:
To do this, the music app must already have been started.
ENTER (14 on RC)
Press this button to activate a function or to display the next
menu.
/
(7/11 on FB)
Press these buttons, to scroll up/down the iPod/iPhone/iPad
Menu.
iPod/iPhone/iPad Charging
Your iPod/iPhone/iPad battery is charged as soon as the
iPod/iPhone/iPad is docked. To do this, the unit must be con-
nected to the mains. The power switch on the back must be
switched to “ON“.
NOTE:
• Not all iPod/iPhone/iPad generations support the
charge mode.
• The duration of the charging process depends on
the iPod/iPhone/iPad which is used and its operating
condition.
Connect External Devices
This device is equipped with two connectors for analogue
playback devices. AUDIO IN (7) on the front and AUX IN on
the back of the device. To listen to the music via the speakers,
connect playback devices such as MP3 player, CD player, etc..
1. Connect the external device as follows:
• Via 3.5 mm stereo jack to AUDIO IN (7).
• Via RCA cable (2x RCA) to AUX IN on the back of the
device.
NOTE:
If external devices are connected to both inputs, play-
back via AUDIO IN (7) is preferred.
2. Now select AUX out mode with the MODE button (4).
NOTE:
Alternatively select AUX mode by pressing the AUX
button (3 on RC).
3. You will find further instructions in the manual of your
external sound source.
4. Listen to music playback from external playback devices
via the speakers. Press the VOL+/VOL- buttons (5/9/13)
to set the volume level.
NOTE:
Set the volume of the external device to a reasonable
level.
Cleaning
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without deter
-
gents.
• Do not submerge the device in water.
• Remove the speaker grill and clean, for instance with a
vacuum cleaner or a lint brush. Replace the grill onto the
mountings after cleaning.
Summary of Contents for IMS 4453
Page 61: ......
