7
Operating and indicator panel
A B
C
D
E
G
F
°C
°C
ON/OFF
A.
Mains pilot indicator (green)
B
Fridge button ON/OFF
C
Temperature setting button (for warmer temperatures)
D
Temperature display
E
Temperature setting button (for colder temperatures)
F
COOLMATIC function "on" indicator (yellow)
G
COOLTMATIC button
Temperature setting buttons
The temperature is adjusted using the “C“ (+) and “E“ (-) buttons. These but-
tons are connected to the temperature display.
•
The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the DESI-
RED temperature (Temperature display flashes) by pressing one of the two
buttons, “C“ (+) or “E“ (-).
•
Each time one of the two buttons is pressed again the DESIRED temperatu-
re is adjusted by 1 °C. The DESIRED temperature must be reached within 24
hours.
If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL tem-
perature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge. The DESIRED
temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the fridge.
The ACTUAL temperature is indicated with illuminated numbers.
14
Changing the light bulb
Warning!
There is a risk of electric shocks! Before changing the light bulb,
switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Replace the lamp with one of the same power (the maximum power is
shown on the light diffuser)
1.
Unplug the mains plug.
2.
To change the light bulb press on the
rear hook and at the same time slide
the cover in the direction indicated
by the arrow.
3.
Change the defective light bulb.
4.
Refit the light bulb cover.
5.
Put the refrigerator back into opera-
tion.
