English
57
KH4232BT_IM
12.04.17
Symptoms
Possible cause
Solution
Headphones can-
not be connected
Pairing does not work.
Check, whether the audio
source supports the A2DP
protocol.
Audio source is turned off. Turn the audio source on.
Bluetooth is turned off on
the audio source.
Turn the Bluetooth function on
in the audio source.
The language of
the announce-
ments from the
earphones is
Chinese.
The language selection
was changed by mistake.
1. Turn the device off, then turn
it on again.
2. Within 2 seconds, briefly
press 2 x to select English.
Technical Data
Model: ........................................................................................................................KH 4232 BT
Protection rating: ..................................................................................................................IPX 4
Net weight: ......................................................................................................... approx. 0,23 kg
Battery: ....................................................................................3,7 V 120 mAh Lithium-Polymer
Charging time: ...........................................................................................approx. 1,5 hours
Operating time: ............................................................................................ approx. 7 hours
Bluetooth
Bluetooth support: ................................................................................................................V 4.0
Transmitter power: ...........................................................................................................2,5 mW
Range: .............................................................................................................approx. 10 meters
Transmitting frequency:................................................................................ 2,400 − 2,483 GHz
Protocols: ..............................................................................................................A2DP / AVRCP
The right to make technical and design modifications in the course of continuous
product development remains reserved.