17
ENGLISH
Preparation
Caution
█
First time use: Run the appliance at least 4
times without adding coffee.
█
Please follow the steps 1 - 2 and 7 - 12 in the
“Brewing Coffee” section.
1
Remove all packaging and stickers and dis-
pose of them according to applicable legal
regulations.
2
Before using the appliance for the first time,
clean all parts which come into contact with
water carefully. Please see full details in the
“Cleaning and Care” section.
3
Make sure that the appliance is placed in an
upright position and on a stable, flat, clean,
dry and non-slip surface.
BrewingCoffee
1
First remove the water tank
F
, then open the
water tank cover
A
and use the glass jug
J
to
fill the water tank
F
with the required amount
of water, but do not fill past the “12” mark. The
brewed amount of coffee will be 10% less than
the filled water, because it is absorbed by the
coffee grounds and the filter. The scale on the
glass jug is marked in coffee cups, e.g. 4 = 4
cups. For a good coffee taste it is suggested
to operate the appliance with at least 4 cups
coffee serving.
Notes
█
Use only clean, cold and fresh drinking water.
█
There is a drip hole on the back of the water
reservoir to prevent exceeding the capacity of
the coffee maker. If you add too much water,
it will drip out from the back of the appliance.
2
Close the water tank cover
A
and open the
filter basket cover
B
.
3
Pull out the filter basket
C
.
4
Take a suitable paper filter (1 x 4) and insert
the paper filter into the filter basket
C
.
Note
█
Use only one paper filter at each time. Make
sure that the paper filter does not bend or fold.
5
Fill the filter with the desired amount of ground
coffee. To do this, you may use the supplied
measuring spoon.
6
Insert the filter basket
C
back into the housing
and close the filter basket cover
B
.
7
Place the glass jug
J
on the warming plate
K
.
Caution
█
If the filter basket
C
is not closed or the glass
jug
J
is not placed accurately, the drip-stop
function will not work properly. It could cause
a hot water or hot coffee overflow.
8
Connect the plug to the wall socket.
9
Turn the appliance on by pushing the On/Off
button
H
.
– The On/Off button
H
illuminates and the
brewing process begins.
Notes
█
The brewing process can be stopped at any
time by pushing the On/Off button
H
again.
█
The appliance is equipped with a drip-stop
I
located underneath the filter basket
C
and
enables you to briefly remove the glass jug
J
to pour coffee before the water has finished
running through the machine.
█
Ventilation slots allow the steam output. Do not
block the ventilation slots with any objects while
the appliance is in use.
█
The coffee machine has a stay-warm function
and can keep the brewed coffee warm for up
to 30 minutes when the machine is switched
on. In accordance with eco design guidelines,
the machine will automatically switch itself off
after this time.
OPERATION______________________________
