Instructions for use
34
What to do if ...
Remedying Faults
In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
•
If the fault code
E10,
E20
or
E40
is shown
in the multidisplay, you may be able to rem-
edy the fault yourself (see Faults Table be-
low). After remedying the fault, press the
button START/PAUSE.
If the fault code is shown again, inform Customer Service.
•
In the case of all other displayed faults (
E
and number or letter),
please inform the Customer Service and state the fault code.
Problem
Possible Cause
Remedy
The washing machine
does not work.
The mains plug is not
plugged in.
Plug in the mains plug.
The fuse of the building's
wiring is not in order.
Replace the fuse.
The filling door is not cor-
rectly closed.
Close the filling door; the
lock must engage audibly.
The button START/PAUSE
was not pressed for long
enough.
Press the button START/
PAUSE until the program be-
gins.
The filling door cannot
be closed.
The child lock is set.
Cancel the child lock
(see section “Child Safety
Feature").
Fault code
E40
ap-
pears. The indicator
MAIN WASH
(HAUPTWÄSCHE,
LAVAGE) flashes.
The filling door is not
correctly closed.
Close the filling door cor-
rectly. Restart the program.
Summary of Contents for KO-LAVAMAT 74740
Page 1: ...ÖKO LAVAMAT 74740 update The Environmentally Friendly Washing Machine User Information ...
Page 52: ...52 ...
Page 53: ...53 ...