•
Set the DRAIN or SPIN programme
•
Press button 8
When the programme has finished the display shows a blinking . The pilot light C goes off. The door can be opened.
Turn the programme selector dial to to switch the machine off.
Drying only
•
Load the laundry.
•
Select a spin cycle at the maximum spin speed allowed for the type of laundry for best performance
•
Set the drying programme for Cottons or Synthetics in the Drying sector of the programme dial.
•
Press button 6 to set the drying time. Press this button repeatedly until the time you want appears on the display.
•
At the end of the drying programme, an acoustic signal sounds and a blinking appears on the display.
•
The anti-crease phase begins, which lasts for about 10 minutes. Light C is on and the door cannot be opened.
NON-STOP programme: Washing and timed drying
•
Load the laundry.
•
Add detergent
•
Switch the machine on: turn the selector dial to the required washing programme/fabric.
•
Press the relevant buttons to set the required options.
•
Press button 6 to set the drying time. When selecting a «non-stop programme» the pilot lights A and B illuminate.
•
The DRYING TIME value appears on the display for some seconds, then the entire duration of the washing and
drying cycle appears.
•
Press button 8 to start the programme.
Summary of Contents for L61271 WDB1
Page 3: ......
