background image

A

The digital indicator can show:
• Programme duration (e. g. 

).

• Delay time (e. g. 

 or 

).

• Cycle end ( ).
• Warning code (

).

B

Extra rinse indicator. It lights on when this option is se-
lected .

C

The 

 indicator blink during the laundry load detec-

tions.

D

Child safety lock indicator.

E

Door locked indicator.

6. 

KNOB AND BUTTONS

6.1 

On/Off 

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.
As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.
For more details, refer to Stand-by

paragraph in Daily Use chapter.

6.2 

Introduction

The options/functions are

not selectable with all

washing programmes. Check

the compatibility between

options/functions and

washing programmes in the

"Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

6.3 

Temp. 

When you select a washing programme,

the appliance automatically proposes a

default temperature.
Set this option to change the default

temperature.

The indicator 

= cold water of the set

temperature comes on (the appliance

does not heat the water).

6.4 

Centrif.

When you set a programme, the

appliance automatically sets the

maximum spin speed allowed.
Touch repeatedly this button to:

Activate the 

Rinse hold option

• Set this option to prevent the laundry

creases.

• The related indicator comes on.

• There is a water in the drum when the

programme is completed.

• The door stays locked and the drum

turns regularly to reduce creasing.

• You must drain the water to unlock

the door.

• If you touch the Inicio/Pausa button,

the appliance performs the spinning

phase and drains the water.

www.aeg.com

12

Summary of Contents for L6FBI821U





































Reviews: