3.1
Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
Use the gloves.
1.
Use a cutter to cut through external
film.
2.
Remove the external film.
3.
Remove the cardboard top and the
polystyrene packaging materials.
4.
Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.
5.
Carefully put down the appliance
with the rear side on it.
6.
Put the front polystyrene packaging
element on the floor under the
appliance.
Make sure not to
damage the hoses.
7.
Remove the polystyrene protection
from the bottom.
1
2
8.
Pull up the appliance in vertical
position.
www.aeg.com
6
