The ProSense System is not
available with all
programmes such as : Wol -
Laine and programmes with
short cycles.
10.8 Starting a programme
with the delay start
1. Press the Startuitstel - Départ Différé
button again and again until the
display shows the number of minutes
or hours of delay.
The related indicator comes on.
2. Press the Start/Pauze - Départ
Pause button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press the Start/
Pauze - Départ Pause
button to start the appliance,
you can cancel or change
the set of the delay start.
10.9 Cancelling the delay
start
To cancel the delay start:
1. Press the Start/Pauze - Départ
Pause button to set the appliance to
pause.
The related indicator flashes.
2. Press the Startuitstel - Départ Différé
button repeatedly until the display
shows .
3. Press the Start/Pauze - Départ
Pause button again to start the
programme immediately.
10.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press the Start/Pauze - Départ
Pause button.
The related indicator flashes.
2. Change the option set.
3. Press the Start/Pauze - Départ
Pause button again.
The programme continues.
10.11 Cancelling a running
programme
1. Press the Aan/Uit - Marche/Arrêt
button to cancel the programme and
to deactivate the appliance.
2. Press the Aan/Uit - Marche/Arrêt
button again to activate the
appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.12 Opening the door
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
1. Press the Start/Pauze - Départ
Pause button .
In the display the related door lock
indicator goes off.
2. Open the appliance door.
3. Close the door and press the Start/
Pauze - Départ Pause button .
The programme or the delay start
continues.
10.13 End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates.
In the display comes on and the door
locked indicator
goes off.
The indicator of the Start/Pauze - Départ
Pause button goes off.
1. Press the Aan/Uit - Marche/Arrêt
button to deactivate the appliance.
ENGLISH
25