2. Load the laundry one item at a time.
3. Turn the programme dial to the
desired drying programme . The
display shows the drying indicator
.
To have a good drying
performance
do not
exceed
the maximum drying loads
recommended in the user
manual.
Do not
set a spin
speed lower than the
automatic speed of the set
programme.
12.2 Drying at automatic
levels
The laundry can be dried at pre-defined
levels of dryness:
1. Press the Droogtegraad - Séchage
button again and again until the
display shows one of the dryness
level indicator:
•
Iron Dry;
•
Cupboard Dry option;
•
Extra Dry option.
The display shows a time value,
calculated on the default load size. If the
amount of your laundry is more or less
than the default size, the appliance
adjusts automatically the time value
during the cycle.
2. Press the Start/Pauze - Départ
Pause button to start the programme.
The display shows the door locked
indicator
. The drying indicator
starts to flash.
You cannot set all dryness
levels for any type of
laundry.
12.3 Timed Drying
The laundry can also be dried with a
manual timed drying:
1. Press the Droogtijd - Minuterie button
again and again to set the drying
time value. The display shows 10
minutes.
• The display shows the set time
value: e.g.
. Each time you
press this button the time value
increases by 5 minutes.
• After some seconds the display
shows a new time value: e.g.
.
The appliance calculates also the
duration of the anti-crease and
the cooling phases.
2. Press the Start/Pauze - Départ
Pause button to start the programme.
• The display shows regularly a
new time value.
• The drying indicator starts to
flash.
• The display shows the door
locked indicator
.
If you set only 10 minutes of
drying, the appliance
performs only a cooling
phase.
If the laundry is not sufficient
dry, set again a short drying
time.
12.4 End of the drying
programme
The appliance stops automatically.
• The acoustic signals operate.
• In the display comes on.
• The indicator Start/Pauze - Départ
Pause goes off.
• The last minutes of the drying cycle
the appliance performs a cooling and
anti-crease phase. The door is still
locked.
When the door locked
goes off in the
display, you can open the door.
1. Press the Aan/Uit - Marche/Arrêt
button for some seconds to
deactivate the appliance.
After some minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
2. Remove the laundry from the
appliance.
Make sure that the drum is empty.
3. Keep the door ajar, to prevent mildew
and odours.
www.aeg.com
28
